DASC Radiator Hose

[blefevre]

This question was asked a long time ago but got no responses. Does anyone know what radiator hose was shipped with the DASC, I would assume it is a hose from different car, I hope at least. I need one to get it installed.

[xxxJohnBoyxxx]

Originally Posted by blefevre

This question was asked a long time ago but got no responses. Does anyone know what radiator hose was shipped with the DASC, I would assume it is a hose from different car, I hope at least. I need one to get it installed.

Talk to denglish318ti. It's from a Ford truck I think. He purchased one in the US then had me mail it to him with some other parts.

I had the part number in PM but deleted it months ago

[denglish318ti]

Yay, I can be helpful for once! Its off a Ford Aerostar truck (whatever the hell that is, sure dont have them in England!). The Gates part number is 21673.

http://www.rockauto.com/catalog/rafr...3&a=UK64-21673

FORD AEROSTAR (1986 - 1995)
same as MAZDA B3000 1994

Also, the belt part number is Gates K060863 off a CADILLAC SEVILLE, 1991, 4.9L 300 cid V8 MFI.

Its a real pain me getting these bits in the UK, but they should be really cheap in the US

[blefevre]

Thank you! That was very helpful

[Trusted-1]

Originally Posted by denglish318ti

Yay, I can be helpful for once! Its off a Ford Aerostar truck (whatever the hell that is, sure dont have them in England!). The Gates part number is 21673.

http://www.rockauto.com/catalog/rafr...3&a=UK64-21673

FORD AEROSTAR (1986 - 1995)
same as MAZDA B3000 1994

Also, the belt part number is Gates K060863 off a CADILLAC SEVILLE, 1991, 4.9L 300 cid V8 MFI.

Its a real pain me getting these bits in the UK, but they should be really cheap in the US

The hose that was on the car my DASC came from had a Goodyear 61417 on it.

That crosses to a Gates part number 21623.

I can't say if the 21673 quoted above is correct but mine fits pretty well.

[m3nut]

Originally Posted by denglish318ti

Yay, I can be helpful for once! Its off a Ford Aerostar truck (whatever the hell that is, sure dont have them in England!). The Gates part number is 21673.

http://www.rockauto.com/catalog/rafr...3&a=UK64-21673

FORD AEROSTAR (1986 - 1995)
same as MAZDA B3000 1994

Also, the belt part number is Gates K060863 off a CADILLAC SEVILLE, 1991, 4.9L 300 cid V8 MFI.

Its a real pain me getting these bits in the UK, but they should be really cheap in the US

Dylan where in the Uk can I get that rad hose? I need it for the weekend

[tiFreak]

Originally Posted by m3nut

Dylan where in the Uk can I get that rad hose? I need it for the weekend

you'd probably have to get one imported from the states, the Aerostar was only sold in the US so they probably wouldn't bother stocking parts in the UK

[Trusted-1]

You might try searching for the part using the Goodyear or Gates part numbers since they may be used on other vehicles there too.

The part numbers I found were:
Goodyear 61417 or crosses to Gates 21623.

Good Luck

[m3nut]

Thank you for the info
I got it all fitted today and used the stock hose, but cut it down! Not the best, but got me going until I can get one from the states. Seen them at Rock Autos $11 but $40 to post

[markrnorton]

Looking good

i suppose the UK contingent should really try and find a UK replacement part form the hose

[m3nut]

Originally Posted by Trusted-1

The hose that was on the car my DASC came from had a Goodyear 61417 on it.

That crosses to a Gates part number 21623.

I can't say if the 21673 quoted above is correct but mine fits pretty well.

Good news received the hose from rock auto's!
I ordered the gates 21623 and 21673. The later is the better fit.
The 21623 is a bit short and needs to be pulled out of shape to fit, but will be a good spare.
Thanks again guy's for the part numbers and links

[Trusted-1]

Originally Posted by m3nut

Good news received the hose from rock auto's!
I ordered the gates 21623 and 21673. The later is the better fit.
The 21623 is a bit short and needs to be pulled out of shape to fit, but will be a good spare.
Thanks again guy's for the part numbers and links

Thanks for confirming which is a better fit.

My kit was used and came with the 21623 so I may get the 21673 before I change the coolant again since it fits better.

Can you post a photo of what it looks like installed?

Thanks

[pdxmotorhead]

On a couple race cars I work on, I replaced the hose with a custom bent metal tube with rubber couplers.

Dave

[m3nut]

Originally Posted by Trusted-1

Thanks for confirming which is a better fit.

My kit was used and came with the 21623 so I may get the 21673 before I change the coolant again since it fits better.

Can you post a photo of what it looks like installed?

Thanks

Sorry it's taken a while!

[Trusted-1]

M3nut

Thanks for the photos.

I am auto crossing next weekend so I may try to swap to this style hose and change coolant before then.

The photos are very helpful.

Trusted-1