Changing fog light bulb

[/Ada1982 /]

Hi,

I got silverstar H1 bulbs for my fox light but i don't know the way to change it without remove a whole bumper. Any advices??

[Tyler]

If you are looking at your drivers side foglight, right to the left of the foglight there is a little hole in the black plastic grill. Stick a screwdriver in that hole and push the hinge to release the foglight. It should pop right out. Same witht the passengers side but the hole is to the right of that one.

If that sounds confusing just ask and maybee i can find a pic for you.

[Tyler]

Ok basically on this picture i attached where i have the yellow marked thats where the holes are to put a screwdriver in to pop them out.

[zboot]

any easy tricks for accessing headlights to replace a bulb or am I stuck with removing turn signal + radiator cover + alarm then headlights?

[Tyler]

Originally Posted by zboot

any easy tricks for accessing headlights to replace a bulb or am I stuck with removing turn signal + radiator cover + alarm then headlights?

You should start a new thread for a different question. But quickly i will say to you that you don't need to remove any of what you said. To change headlight bulb pop hood simply unplug from lights take out the old bulb and pop in the new one. There shouldn't be anything in your way to remove this.

[/Ada1982 /]

Thanks a lot tyler... i got it done today in like 5 mins with your help!