Hey guys! New here to the site, and new to compacts! Not new to E36's though as I have had a few in the past.
Previous E36's were a 318is with an s54b32, 325i coupe, m3 saloon and a 318is with a turbo m50b25 conversion i had done.
Current E36 is a 318ti in tuerkis metallic. It is lowered on a set of coilovers i had sat about from my old 318is (sits high at the arse due to not being a coupe). On a set of 17" style 32's, and I have just finished changing the interior from browny grey to black. The car also has a 4.44 welded diff from an e30 which makes it very drifty... Ideas for this one are to make an s42 style engine in terms of power and then drift it. The only photos i have of it are ones where i am holding an Astra GSI spoiler on the arse of it to see if it looked ok... I am still undecided! Excuse the quality as i dont have a camera so used my girlfriends phone!
As far as the s42 side of things goes, i have already got my spare bottom end built with a 320d crank, m42 conrods, and s50b30 pistons. I am currently working on the head in terms of porting and polishing, trying to source a set of high lift cams, solid lifers and titanium valve springs, and have a set of s50b30 throttle bodies on their way to me as i type this to try get ITB's on this bitch!
Hopefully I can get to learn a good bit of knowledge from you guys, as don't let the previous cars fool you, I'm thick as ****!
318ti from Aberdeenshire 
Linear Mode
