» Site Navigation | | » Recent Threads | looove 04-16-2024 01:18 PM 04-16-2024 01:18 PM 0 Comments, 566 Views | | lolita porn 04-13-2024 11:45 PM 04-13-2024 11:45 PM 0 Comments, 230 Views | lolita porn 04-13-2024 11:43 PM 04-13-2024 11:44 PM 1 Comments, 151 Views | lolita porn 04-13-2024 11:40 PM 04-13-2024 11:41 PM 1 Comments, 158 Views | lolita porn 04-13-2024 11:38 PM 04-13-2024 11:39 PM 1 Comments, 166 Views | lolita porn 04-13-2024 11:36 PM 04-13-2024 11:37 PM 1 Comments, 164 Views | lolita porn 04-13-2024 11:35 PM 04-13-2024 11:35 PM 0 Comments, 140 Views | lolita porn 04-13-2024 11:34 PM 04-13-2024 11:34 PM 0 Comments, 142 Views | lolita porn 04-13-2024 11:33 PM 04-13-2024 11:33 PM 0 Comments, 138 Views | | | | | | 02-14-2008, 09:21 PM | | Senior Member Join Date: Apr 2006 Location: Oxford, Ohio Posts: 868 | Oil Filter Housing Leak fix DIY I hope this helps anyone with this problem. Attachment... | | | By borisf on 11-28-2020, 08:50 AM | Just followed these instructions for my new-to-me 96 318ti and it worked perfectly! Thank you for the write up, just had the following comments for future people doing this fix: - The bit to remove the idler pulley screw is a T50 Torx bit. Make sure you have that size before starting the job otherwise you will have to make a hardware store trip.
- Keep plenty of shop towels on hand to soak up all the old oil that leaked.
- Seems like people aren't sure whether or not they should buy the bush/valve, definitely buy one because it seems like the last person to do the job on my car used the wrong size bush which probably explained at least part of my leak. You don't want to get to that step and realize the bush is the problem or its orings are bad and not have one on hand.
- The alternator is a pain to get out and in ! Just be patient, use WD40 and rock it back and forth to get in/out. I will be honest and say that I used a flathead and hammer to get the alternator back in but do that at your own risk.
| Last edited by borisf; 11-28-2020 at 08:53 AM.. Reason: Fix formatting | | Thanks for reviving the thread so I didn't have to go looking for the DIY! (Not that its really that hard to find). I just did mine yesterday & that DIY is great! Not a difficult job but time consuming, and getting those alternator holes lined up is a PITA! Looks to be good and just in time to put it away for the winter. | | | | Currently Active Users Viewing This Tutorial: 2 (0 members and 2 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is On | | | |
All times are GMT +1. The time now is 10:52 AM.