318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Maintenance

Notices

Maintenance Service Interval questions, oil change info.

.
» Recent Threads
1999 M-Sport For Sale
12-31-2023 05:10 PM
Last post by Coop540iT
03-23-2024 06:39 PM
1 Replies, 106,638 Views
Once again 318ti owner...
03-20-2024 12:39 PM
Last post by two30grain
03-22-2024 02:04 PM
1 Replies, 69,562 Views
What brakes do I...
03-20-2024 03:27 PM
Last post by huirtera
03-20-2024 03:27 PM
0 Replies, 66,811 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 05-21-2012, 06:12 PM   #1
gusgriff
Member
 
Join Date: Apr 2012
Location: atlanta
Posts: 58
iTrader: (0)
Default Radiator Flush

What material is the best to flush a radiator and attempt to remove mineral scale. Years ago when the radiators were all metal you could soak is a caustic bath but with all the plastic on this radiator it may not be prudent.

Removed the radiator to exchange the M42 engine.

I want also to flush the replacement engine before putting in car. I removed the thermostat and water pump and found a some mineral scale especially on the water pump. Both will be replaced after flushing.

One option is to use white vinegar but open to suggestions.
gusgriff is offline   Reply With Quote
Old 05-22-2012, 01:21 AM   #2
jca
Senior Member
 
jca's Avatar
 
Join Date: Dec 2010
Location: Wichita Falls, Texas
Posts: 1,364
iTrader: (1)
Default

That's a good question that I don't have an answer to. Have you tried to Google it?
jca is offline   Reply With Quote
Old 05-22-2012, 02:15 AM   #3
cooljess76
NOBODY F's with the Jesus
 
cooljess76's Avatar
 
Join Date: Oct 2006
Location: Ventura California
Posts: 7,824
iTrader: (6)
Default

New radiators are cheap enough as it is. You could pick up a Behr which the same as OEM for about $140. Since the factory radiators tend to go at about 140k-150k miles, might be a good idea to replace it anyway.
cooljess76 is offline   Reply With Quote
Old 05-22-2012, 03:51 AM   #4
gusgriff
Member
 
Join Date: Apr 2012
Location: atlanta
Posts: 58
iTrader: (0)
Default

Quote:
Originally Posted by jca View Post
That's a good question that I don't have an answer to. Have you tried to Google it?
Thank You for your suggestion but I believe the reason people ask questions on this forum rather than just using Google is to get opinions of people who have the same type car/equipment and the answer hopefully would be more specific and relative.
gusgriff is offline   Reply With Quote
Old 05-24-2012, 12:42 PM   #5
J!m
Moderator
 
J!m's Avatar
 
Join Date: Jun 2003
Location: Bouncing off the rev limiter in CT!
Posts: 3,156
Vehicles
iTrader: (1)
Default

White vinegar is a good idea for a safe flush I think. Also good for cleaning records!

Tap water / white vinegar/ tap water/ distilled water then finally refill with 50-50 BMW coolant (the blue stuff) and distilled water.

If you refill it with tap water and coolant, it will scale up again. Tap water is where the minerals come from to cause the scale...
__________________
"Speed's just a question of money. How fast you 'wanna go?"

Order Swap Manuals Here => http://www.318ti.org/forum/showthread.php?t=12912

WolferJ- gone but not forgotten. R.I.P.
J!m is offline   Reply With Quote
Old 05-24-2012, 02:44 PM   #6
gusgriff
Member
 
Join Date: Apr 2012
Location: atlanta
Posts: 58
iTrader: (0)
Default

Thanks Jim. I will use Distilled and the BMW blue. In fact I plan to do the same on my 535is.
gusgriff is offline   Reply With Quote
Old 05-24-2012, 04:51 PM   #7
J!m
Moderator
 
J!m's Avatar
 
Join Date: Jun 2003
Location: Bouncing off the rev limiter in CT!
Posts: 3,156
Vehicles
iTrader: (1)
Default

Good man.

People don't realise how bad tap water can be. Obviously it varies depending on the source; however you want zero minerals in the water if you can, and you can with cheap and easy to find (check your supermarket!) distilled water.

Sold for clothes irons for the same reason- minerals in the water can/will stain your shirts when ironing...
__________________
"Speed's just a question of money. How fast you 'wanna go?"

Order Swap Manuals Here => http://www.318ti.org/forum/showthread.php?t=12912

WolferJ- gone but not forgotten. R.I.P.
J!m is offline   Reply With Quote
Old 05-25-2012, 07:55 PM   #8
ti cali ed
Member
 
Join Date: Mar 2012
Location: iowa
Posts: 90
iTrader: (0)
Default

There are a few desent radiator flushes on the market. I believe prestone makes the most common one you can go the the parts store and pick up. Flushing radiators has however become almost a thing of the past. Most new cars are highly voltage sensitive and one should never consider putting tap water in as in the days or yore. I know this means little after you have build up. Whatever flush you use could in the end cause more headaches you will be knocking loose large chunks of deposits that most likly will block the radiaor or cause already weak seals to fail. Bmw's seem to have a frail cooling system as it is, if it were me I would overhaul the system while I had it apart, i.e. replace the water pump, the cooling connectors, the hoses and radiator.
ti cali ed is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 03:02 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 81.11 k/96.42 k (15.88%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.