97 ti part out, tranny, interior, etc

[yeehawbob]

WTB: 1. Passenger side Window regulator, without motor is fine.
2. Rear speaker covers with the rear panel clips intact.
3. Antenna base if Justin above does not buy.
4. Glovebox door with lock or without.
Let me know price or PM me.
Cheers!

[zachth]

curious if you have/still have...
1- drivers side mirror, glass only
2-floor mats
3-the black interior piece that covers the side view mirror mounting location
...and if so what kind of shape are they in?

thanks

[318tian]

I have the glass and interior plastic piece for $20 shipped. Paypal is ian_adcock@yahoo.com

[Zcrack]

do you still have the door panels? and i also need the passenger side speaker cover (the one by the floor), and do you have the molding that runs along the bottom of the door along the carpet? mines started to turn greenish.

[318tian]

i have the passenger side speaker cover for $13 shipped. i have the door molding pieces but i will have check and see if they are greenish. they may be. door panels are sold. paypal is ian_adcock@yahoo.com. thanks.

[MFEnthusiast]

Hi,
Saw your post on the forum today. I live in Huntsville, Alabama and I could be interested in your block. Does it include the crankshaft and rods/pistons?
Thanks,
Mark

[318tian]

the block includes all internals. Head was cracked due to water pump failure by previous owner. It still has a few other things on it also like timing chain and such. Would take $140 if you pick it up or we could find a way to freight it there. I'm near Monroe, la about 2 hours from Jackson, ms. Will email pics if you pm me your email. Thanks

[MFEnthusiast]

Do you ever have reason/occasion to drive over to Jackson? I will be driving to Tuscaloosa from time to time with my daughter going to school there. I definitely would like to buy it from you. Also, I lost the bubble on your original post - verifying, it is a M44 block, right? And, do you have any front end body parts to sell, or if you could help locate some in your area, the idea of making a trip there would be a slam dunk for me
Thanks,
Mark

[318tian]

it is an m44 block. I don't really have any front end parts and bmw parts are hard to come by in my area. I might could drive to Jackson one day if you cover say $20 in gas. It will be very hard to tranfer a block from one vehicle to the other. It's extremely heavy.

[MFEnthusiast]

Hi,
I want to buy the block. Let's take this off line to spare others the details.
Mark
256-527-7791

[mgbman69]

Bump for a good guy! Thanks again for the driveshaft!

[Entropyman]

What do you want for the rear subframe and control arms if they are still available?

[Eric]

I'm looking for:

- a good PS pump and rack.

- 4 good rotors with pads.

- Foglight lenses

- Plastic panels that go under engine and front bumper

- 1 or more 5-spoke wheels and / or a set of winter rims, +/- tires

Please let me know if you've still got any of these.

Thanks,

- Eric

[Entropyman]

Got my subframe today. It looks great and I got it quick, great seller! Thanks!

[jac_buffalo]

Do you have the latch for the glove compartment. I'm looking for a black one. The plastic piece that you open the glove box with.