cooljess76, Great write-up. I just finished moving mine. I ended up using an Odyssey PC680 battery. It starts the S52 right up with no problems and fits in the plastic storage well. I did have to Dremel out the ribs on the front and rear walls of the well. Anyway, a couple of things you might want to add to the write-up. The seat belt bolt in step 6 is a T-50 torx. That slowed me down a bit as I didn't have one. Also, i just happened to have some OEM body nuts lying around and they fit the holes in the fender for the distribution block bracket perfectly. Part number is 63-17-1-367-868. |