318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Electrical

Notices

Electrical All wiring questions.

.
» Recent Threads
1999 M-Sport For Sale
12-31-2023 05:10 PM
Last post by Coop540iT
03-23-2024 06:39 PM
1 Replies, 106,480 Views
Once again 318ti owner...
03-20-2024 12:39 PM
Last post by two30grain
03-22-2024 02:04 PM
1 Replies, 69,398 Views
What brakes do I...
03-20-2024 03:27 PM
Last post by huirtera
03-20-2024 03:27 PM
0 Replies, 66,640 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 05-03-2021, 02:16 AM   #1
ktrazy
Junior Member
 
Join Date: May 2021
Location: St. Paul
Posts: 1
iTrader: (0)
Default 3-button Alarm Programming

I've scoured forums all day for this answer and I found it, but it didn't work. I have a '95 with the alarm installed from the factory. Getting to the box was a bit of a pain since it's behind the glove box, behind a metal dash brace that requires a uniquely short phillips-head screw driver.

Anyways... I've sourced myself a 3-button keyless entry fob and opened it up and got the chip out.

From what I understand, this is the programming process:
1. Remove false door on back of alarm module
2. Insert ROM chip from remote into slot of module
3. Turn ignition to ON (Position 2)
4. Push and hold black reset button for 10 seconds
5. Anti-theft light in center console will start flashing confirming ROM has been read and accepted (This is where I don't get the confirmation flash but it did flash twice at one point which I figured was the confirmation flash)
6. Insert ROM chip back into fob and test.

I've got it as far as INTERMITTENTLY locking and unlocking with the fob, however when it does lock remotely, the light doesn't flash in the center console. 3/4 times it does not lock/unlock. If I push and hold on the panic button it does sound the alarm. Thoughts?

Last edited by ktrazy; 05-03-2021 at 02:27 AM.
ktrazy is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
radio remote 3 button key programing with no alarm dazza316i Electrical 4 05-22-2011 09:12 PM
MD 2 button Alarm remote, New in box. familytruckster US and North America 1 12-28-2010 02:30 PM
1996 318ti 1 button key programming? davydee318ti Electrical 3 04-28-2010 11:56 PM
WTB: 3 button alarm fob wolferj-RIP US and North America 4 02-03-2009 09:38 AM
Keyless entry/lock button triggers alarm tjrags Electrical 2 01-17-2006 03:56 AM


All times are GMT +1. The time now is 02:22 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 56.54 k/64.86 k (12.82%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.