Quote:
Originally Posted by Trusted-1  It is unlikely your problem is the same as Dan's since his car had wires cut by the previous owner.
The ABS light will be on if the stepper motor is not connected to the old M44 Throttlebody ASC unit. I read a post somewhere that said you could use a resistor in place of connecting the motor but the ABS light will be on if that is not connected.
That's the first thing I would check anyway. Good luck |
Do you know what type of resistor I can use for this? I don't want to plug in old unit nor do I know if I still have it
Threaded Mode