Parting Out 1995 318i Partout

[hodge]

Hey all,

Moving to California in 4 months, so I need this gone! Feel free to PM me offers, questions, concerns, etc. It would be nice to just get rid of everything at once, but I know that probably won't happen, so I will list parts that may help to be enticing. If something isn’t listed here, IT IS PROBABLY STILL AVAILABLE, just ask!

If you are in the Southwest Florida area, I can meet you or you can pick up the parts anywhere from Sarasota down to Naples. The car is located in Venice.


Engine:

• M42B18 motor: Great condition, new Graf water pump 10k miles ago, 170,000 miles. No alternator, has engine wires, accessories- $500 picked up (if needed for shipping, let me know)
• Radiator: original radiator, good condition, no leaks, 170,000 miles- $40 + shipping
• Aux Fan: runs great, original part- $80 + shipping
• Starter: great condition, no issues or problems, $40 + shipping
• Engine fan + clutch: great shape, no problems: $40 + shipping

Drivetrain:

• Getrag 250 Transmission: good condition, 170,000 miles- $250 picked up (if needed for shipping, let me know)
• 3.45 LSD: Metric Mechanic Rally rebuilt unit, 4 clutch packs, variable slip, 20k miles- $800 picked up (if needed for shipping, let me know)
• Half shafts: 170,000 miles, some rust, good shape- $80 each, $140 both + shipping

Suspension:

• TEIN Basic Coilovers: good shape, no leaks, 25k miles- $400 + shipping
• Turner Motorsport Camber plates: black, great shape, 15k miles- $150 + shipping

Body:

• All panels available and are Schwarz II Black (668)- Make offers
• CF Rear wing with gurney flap (clamps to trunk lid)- $100 + shipping

Interior:

• Interior is ‘Natur’ Tan and vinyl.
• Seats are in great shape, drivers side lower bolster has 6” rip in it- Make offers
• Rear bench in great shape, no rips- make offers
• Carpet available, in good shape, some minor stains- Make offers
• MOMO Monte Carlo Steering Wheel: excellent condition, has E36 mount adapter- $180 + shipping

Wheels/Tires:

• 4x 17x7.5 M Contours: Good shape, paint is worn some minor curb rash, one wheel was repaired after I got them (had a crack), have mounted Dunlop Direzza StarSpec Z1 235/40/17 tires (even tread wear, but worn down)- $500 picked up (if needed for shipping, let me know)

[Ralliart10]

How much for the fenders and hood??

[Bobtail_Bimmer]

Interested in passenger door panel. Any tears, wear, etc? Might also be interested in cargo area cover if its in good shape.

[hodge]

I forgot to mention that the hood clear coat is flaking, but the fenders are in good shape.

I will head to UPS and FedEx and find out shipping prices for you tomorrow.

I see good condition hoods going for $100+ so maybe $70+ shipping for the hood and $100 each fender +shipping?

Let me know how that sounds.

[hodge]

Originally Posted by Bobtail_Bimmer

Interested in passenger door panel. Any tears, wear, etc? Might also be interested in cargo area cover if its in good shape.

Door panel: no tears, there is a small area up by the side mirror area that is peeling back, but it has been the same for the past 8 years and has not gotten worse. I have never taken the panel off.

Cargo cover: are you talking about the carpet that covers the spare wheel well? It is in good shape, but as best as I remember there are only a few minor stains.

[Bobtail_Bimmer]

By cargo area cover im refering to the panel that rasies when you raise the hatch.

[M-technik-3]

Have a friend who might be interested in the Tein's. I know your in Florida but do the adjusters spin freely?

Picture of the rear decklid spoiler? Who makes it? DTM Fiberworks?

[hodge]

Originally Posted by Bobtail_Bimmer

By cargo area cover im refering to the panel that rasies when you raise the hatch.

Oh, well this is a 318i SEDAN so it doesn't have that cargo cover like our ti's do.

Originally Posted by M-technik-3

Have a friend who might be interested in the Tein's. I know your in Florida but do the adjusters spin freely?

Picture of the rear decklid spoiler? Who makes it? DTM Fiberworks?

Yeah, they move freely. I haven't moved the adjusters in a few years, but they work great.

I will try to find a picture of the wing. I believe it is a DTM Fiberworks. I bought it years ago on a BF.c group buy.

[1996 328ti]

Originally Posted by Bobtail_Bimmer

Interested in passenger door panel. Any tears, wear, etc? Might also be interested in cargo area cover if its in good shape.

Door panel is unique to the ti.

[Bobtail_Bimmer]

Shoot my bad. Should have paid more attention to what you were parting out. Sorry for your time and thanks for getting back with me.

[1996 328ti]

Originally Posted by Bobtail_Bimmer

Shoot my bad. Should have paid more attention to what you were parting out. Sorry for your time and thanks for getting back with me.

Damn cars with trunks.

[hodge]

Haha yeah guys be careful! This is a SEDAN! Sorry too have you get your hopes up like that!

That being said, many parts are transferable, but not everything!

Also, We have been able to fit so much more stuff into my wife's ti than I ever could into my sedan, its unreal. Screw trunks!

[fadil3ti]

what kind of muffler you have?

[hodge]

Sorry, I didnt see your reply and havent been on in a few days.

I have an original Eberspaecher and a Bosal BroSpeed. The Eberspaecher is a bit rusty but the insides are great. I planned to put the Bosal on my wife's ti unless somebody offers to buy it.

[M-technik-3]

Hodge can you get a photo of the suspension? My buddy would like it for his project e36.

Would also need a shipping estimate to 01085