Hello...
I was browsing some sites and I came across some aftermarket cams for the M42 Engine...
One is Kent, the other is Piper.
I don't know much about cams, but for those of you who do, here are the specs:
Kent:
Power band - 2000-6500
Cam Lift - .408"
Valve Lift - .408"
Duration - 256º
Timing Figures - 18/58 58/18
Full lift - 110º 110º
Piper:
Power band - 1500-6000
Cam Lift - NA
Valve Lift - .400"
Duration - 264º
Timing Figures - 22/62 62/22
Full lift - 110º 110º
I really don't know what these numbers mean, but would swapping cams be a good mod? My ti is not a daily driver, so low-end torque is not an issue...
Regards!