So have you seen other vehicles with Yellow high beams and wonder how they did that? It’s quiet easy and looks GREAT! I will show you how to do them on your very own Fogs and Head Lamps
Tools and Supplies Needed
- Flat Head Screw Driver
- Glass Paint
- Mineral Spirits or a Cleaner
- Painters tape
- TIME & PATIENCE!
High Beam French Style.
NOTE: CAN ONLY BE DONE WITH AFTERMARKERT DEPO OR DJ AUTO GLASS HEAD LAMPS. YOU CAN TRY WITH YOUR PLASTIC HEAD LAMPS BUT DO AT YOUR OWN RISK I TAKE NO RESPONSIBILITY FOR A BROKEN HEAD LAMP OR ANYTHING THIS IS AGAIN DO AT YOUR OWN RISK!! Step 1- By now you should have your Headligthts off your vehicle and on a place where you can disassemble them. There are 4 metal clips you must remove first on your headlights to pull them apart. 2 on top and 2 on bottoms
insert your flat head screw driver into the slot and pry it up gentle
remove all four clips and put them aside like so
Step 2 - Removing the glass from the housing.
There are 4 plastic clips holding the glass part of the headlight to the housing, two on each side. CAREFULLY PULL THEM BACK AWAY FROM THE HOUSING!! THEY CAN BREAK WITH TOO MUCH FORCE!!