318ti.org forum

Go Back   318ti.org forum > Classifieds > WTB > US and North America

Notices

US and North America
Want to buy. North America only!

.
» Recent Threads
1999 M3 Swap
09-07-2023 10:10 PM
Last post by buzzboy
05-02-2024 08:18 PM
6 Replies, 348,993 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 09-07-2012, 06:16 PM   #1
cmoore
Senior Member
 
Join Date: Jun 2012
Location: philadelphia
Posts: 217
iTrader: (1)
Default Looking for sand grey seat fabric

My door panels were butchered for a speaker install. i am attempting to retrofit them closer to stock with some stock fabric, and put original speakerholes back in place. So what i am looking for is either beat up/ripped front/rear seats that someone put aside or maybe took out for track/autoX. And even then, given the expense of shipping seats, hoping to find someone to take a pair of scissors and cut out broad areas of the fabric and just send that to me.
See attached photo for the material i am looking for. It is from a 97 Active with sand grey fabric (not faux leather) interior. The same fabric is used on the door panels and seats.

If you have some old/beat up seats you didn't think were worth selling as they are too beat up, perhaps they would be of value to me for repairing some door panels. Willing to pay a reasonable amount plus shipping.
Thanks.
PM or cmoore.ny@gmail.com
Attached Thumbnails
Click image for larger version Name:	doorpnl.jpg Views:	83 Size:	30.9 KB ID:	13283  
cmoore is offline   Reply With Quote
Old 09-28-2012, 06:26 AM   #2
touring intl
Junior Member
 
Join Date: Sep 2012
Location: Southern Cali
Posts: 6
iTrader: (0)
Default

Quote:
Originally Posted by cmoore View Post
My door panels were butchered for a speaker install. i am attempting to retrofit them closer to stock with some stock fabric, and put original speakerholes back in place. So what i am looking for is either beat up/ripped front/rear seats that someone put aside or maybe took out for track/autoX. And even then, given the expense of shipping seats, hoping to find someone to take a pair of scissors and cut out broad areas of the fabric and just send that to me.
See attached photo for the material i am looking for. It is from a 97 Active with sand grey fabric (not faux leather) interior. The same fabric is used on the door panels and seats.

If you have some old/beat up seats you didn't think were worth selling as they are too beat up, perhaps they would be of value to me for repairing some door panels. Willing to pay a reasonable amount plus shipping.
Thanks.
PM or cmoore.ny@gmail.com
Same boat as you, but worse the (PO "clown") punch 4 holes in all the panels to put speakers in them , so far I have a passengers door panel off a donor Ti I found today. (driver's panel was already gone)
touring intl is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY: Seat Belt Buckle Switch - Trick the Airbag Light CirrusSR22 Knowledge Base 13 07-31-2017 05:41 PM
DIY Leather seat repair and refinishing... wolferj-RIP Knowledge Base 27 09-15-2013 01:54 AM
Seat Fabric / Seat Disassembly CirrusSR22 Interior and ICE 13 07-14-2010 02:21 PM
racing seats Jean H.318TI Lounge 7 07-13-2010 04:57 PM
Recaro Sport seat, black Artista/Nardo fabric aparatchik US and North America 0 12-23-2007 05:28 AM


All times are GMT +1. The time now is 10:49 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 62.71 k/72.38 k (13.36%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.