» Site Navigation | | » Recent Threads | | | | | | 04-10-2006, 03:59 AM | #1 | Senior Member Join Date: Jan 2006 Location: Tacompton, WA Posts: 309 | Electric fan does anyone know if you are able to buy just the electric fan sensor or do you have to buy the whole new fan.....i think that is what the fan is called it is the fan behind the radiator... thanks! __________________ 95 318ti Alpine white, E46 m3 front bumper, Clear Corners, Cosmo CAI, k&n filter, Flowmaster catback, front strut bars, sony 12" sub Kenwood 800watt amp & Aiwa Deck, stickers Future: Angel Eyes, Drop, Rims, and rear bumper 318ti.org sticker (added 100HP) | | | 04-13-2006, 07:58 AM | #2 | Senior Member Join Date: Feb 2005 Location: Richmond Hill, GA Posts: 1,231 | make sure its not the dual temp switch on the passenger side of the radiator. mine didn't work for the longest time and that was the reason. | | | 04-13-2006, 10:23 AM | #3 | Senior Member Join Date: Jun 2004 Location: bris Posts: 287 | are you talking about the sensor that turns the fan on and off?? you can replace just that because mine was dead and the fan was always on. | | | 04-14-2006, 11:26 PM | #4 | Member Join Date: Jun 2005 Location: Vineland, NJ Posts: 47 | Any suggestions? i think i might have the same problem!!! i replaced the radiator, thermostat, hoses, gaskets, etc. and still the car is overheating...i noticed the fan wasnt turning on..so i checked the fuses and they were ok. I removed the fan once again. I checked the fan motor and i saw a pipe like part where the cables from the fan motor go into and it seemed it had sand inside. i dont know the function of this part, so if someone can enlight me on this. After reading this post i am wondering if my problem is the sensor you have mentioned. are there any tricks i could try, so i can rule out the fan motor...maybe connecting it directly to a battery and see if it works maybe? at this rate...it seems i am going to have to replace everything! lol | | | 04-15-2006, 01:04 AM | #5 | Senior Member Join Date: Jun 2003 Location: Greenville, SC Posts: 9,356 | Isn't there some resistor that is known to blow? __________________ ...steven BMW CCA #146825 1996 BMW 328ti • 2003 MINI Cooper S • 2016 M235i www.bmwcca.org | | | 04-15-2006, 08:59 AM | #6 | Senior Member Join Date: Aug 2004 Location: state college, pa Posts: 3,431 | __________________ I scream, you scream, we all scream for ZOMBIES. | | | 04-15-2006, 09:03 AM | #7 | Senior Member Join Date: May 2005 Location: CG68 Posts: 280 | Up a little late, eh? | | | 04-15-2006, 05:07 PM | #8 | Senior Member Join Date: Aug 2004 Location: state college, pa Posts: 3,431 | I was doing everything I could to prevent the spins. __________________ I scream, you scream, we all scream for ZOMBIES. | | | 04-16-2006, 09:05 PM | #9 | Junior Member Join Date: Sep 2004 Location: Malta, Europe Posts: 19 | Been there, done it!! Dual temperature sensor can be changed and the tube like thing attached to the fan by two wires is actually the low speed resistor known to fail. I substituted this for an E46 blower motor resistor. This has various tappings so you can actually set the low fan speed! It's been working fine for close to 2 years now! Good luck | | | 06-27-2006, 01:42 PM | #10 | Junior Member Join Date: Jun 2006 Posts: 19 | low speed resistor So i'm new to the Ti forums and sorry i don't actually have a Ti, however i have a 95 Is, and i'm having issues with my electric fan. after posting around on BF's....... http : / / forums. bimmerforums . com /forum / showthread . php ? t=554117 i found out that apparently the Ti's have an issue with the Low speed resistor on the fan too, looking for any fixes, and please realize i'm ok mechanically, but not by any stretch of the means a mechanic or electrician, so looking for some lamens terms help. thanks guys! | | | | Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | Posting Rules | You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |