You will want to get the 96-99 non-offset front LCAB. They have the same external dimensions and the stock bushings but are solid rubber. Any machine shop should be able to press the old bushings out and press in the new ones. Just be sure to line up the marks on the bushing with the lines on the "lollipops". __________________
'95 330ti CS w/sr delete, S50USB30, cams, 24# inj, Conforti SW, Euro HFM, Samco Silicone Intake Boot, BBTB, Euro Oil Cooler, JTD CAI Duct, RE DMS exhaust, RE Tranny mounts, CF Valve Cover, LTW flywheel/Kevlar sprung hub clutch, RE SSK, 3.46 Finned LSD (M6) , M3 tranny, Brembos, RE Wheel Studs, SS brake/clutch lines, CF interior, Rear Headrest retrofit, Tilt Steering retrofit, 13.5 lb DynaBatt in rear, LED interior/footwell lights, ZKW HID, Headlight Aim Control, Rear fog light w/cluster indicator, CF 3 Aux gauge pod, BMW Traffic Pro/Alpine MP3-CD Changer, Staggered LTW wheels, '95 M3 steering rack, VIS CF Hood, M3 LTW Strut Bar, TCK SA coilovers, Red LTW Motorsport Seatbelts, OEM Fire Extinguisher, Z8 Starter button, Auto dim rear view mirror w/ Homelink/Compass, PDC, Rear Sun Shade, Euro Gauge Cluster w/oil temp/shift light , Headlight Washers, "Motorsport" Door Handles, CF Grills, French ZKW Fogs, Euro dash bins, Power Lumbar Support is next, Coming e39 M5 interior light, Bimmer Magazine 8/2007 | 
LCAB question 
Linear Mode
