318ti.org forum

Go Back   318ti.org forum > Garage > Lounge

Notices

Lounge Temporary forum until new sections are suggested.

.
» Recent Threads
The 318ti OBD-II engine...
10-19-2006 06:48 PM
Last post by kupkake303
05-09-2024 06:12 PM
211 Replies, 1,309,213 Views
1999 M3 Swap
09-07-2023 10:10 PM
Last post by buzzboy
05-02-2024 08:18 PM
6 Replies, 405,334 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 09-26-2007, 10:03 PM   #1
H3_2.1-ti
Senior Member
 
H3_2.1-ti's Avatar
 
Join Date: Apr 2005
Location: Great White North!
Posts: 701
iTrader: (0)
Default Show n' Shine 07

Anyone attending Bavauto's Show n' Shine on Oct. 7th? I am 85% sure I'll be attending; the other 15% depends on baby Irini.
__________________

Engine: 2.1L Hartge conversion (bored to 86X91mm, ported & polished head, new valves, new crank, & upgraded ECU), Supersprint SS headers, Hartge exhaust, custom cat bypass (track), KV85 wires, Bosch platinum plugs, Vitesse cf spark plug cover, Vitesse cf CAI, Samco hoses, Fiamm air horns. Drivetrain: custom ssk, Vitesse adj. clutch stop, Redline D4 ATF & 75W90. Chassis: 18x8.5 Hartge Classics on 225/40/ZR18 Direzza DZ101s, 17x8 Hartge 7 spokes on 235/40/17 Direzza Z1 *specs and 17x9 Enkei MT1-R on 235/40/17 Direzza Z1 *specs(track), Vitesse 10mm spacers with cf/billet hub extenders, Bilstein PSS9 coilovers, Hartge sway bars & strut brace, urethane offset LCABs, Vitesse rsb, billet/urethane RSMs, X-brace, ATE BBK, ATE slotted rr. rotors, Goodridge ss. lines, ATE Superblue. Exterior: Violettschwarz, Hartge lip spoiler, window spoiler, hatch spoiler & mirrors, Vitesse cf door pillars, Vitesse cf fog light blanks (track), ZKW ellipsoids, HIDs in headlights, highbeams and foglights, and much more... Performance BMW Magazine feature car March 2003 www.vitessetuning.com
H3_2.1-ti is offline   Reply With Quote
Old 09-27-2007, 01:25 PM   #2
H3_2.1-ti
Senior Member
 
H3_2.1-ti's Avatar
 
Join Date: Apr 2005
Location: Great White North!
Posts: 701
iTrader: (0)
Default

Anyone?
__________________

Engine: 2.1L Hartge conversion (bored to 86X91mm, ported & polished head, new valves, new crank, & upgraded ECU), Supersprint SS headers, Hartge exhaust, custom cat bypass (track), KV85 wires, Bosch platinum plugs, Vitesse cf spark plug cover, Vitesse cf CAI, Samco hoses, Fiamm air horns. Drivetrain: custom ssk, Vitesse adj. clutch stop, Redline D4 ATF & 75W90. Chassis: 18x8.5 Hartge Classics on 225/40/ZR18 Direzza DZ101s, 17x8 Hartge 7 spokes on 235/40/17 Direzza Z1 *specs and 17x9 Enkei MT1-R on 235/40/17 Direzza Z1 *specs(track), Vitesse 10mm spacers with cf/billet hub extenders, Bilstein PSS9 coilovers, Hartge sway bars & strut brace, urethane offset LCABs, Vitesse rsb, billet/urethane RSMs, X-brace, ATE BBK, ATE slotted rr. rotors, Goodridge ss. lines, ATE Superblue. Exterior: Violettschwarz, Hartge lip spoiler, window spoiler, hatch spoiler & mirrors, Vitesse cf door pillars, Vitesse cf fog light blanks (track), ZKW ellipsoids, HIDs in headlights, highbeams and foglights, and much more... Performance BMW Magazine feature car March 2003 www.vitessetuning.com
H3_2.1-ti is offline   Reply With Quote
Old 09-27-2007, 01:28 PM   #3
tiFreak
Senior Member
 
Join Date: Sep 2007
Location: asdfasdf
Posts: 10,002
Vehicles
iTrader: (8)
Default

I may seeing as I live in Vermont which is right next to New Hampshire and it's a pretty short drive to Portsmouth.
tiFreak is offline   Reply With Quote
Old 09-28-2007, 12:15 AM   #4
H3_2.1-ti
Senior Member
 
H3_2.1-ti's Avatar
 
Join Date: Apr 2005
Location: Great White North!
Posts: 701
iTrader: (0)
Default

Come on guys. Most of us are on the East Coast...
__________________

Engine: 2.1L Hartge conversion (bored to 86X91mm, ported & polished head, new valves, new crank, & upgraded ECU), Supersprint SS headers, Hartge exhaust, custom cat bypass (track), KV85 wires, Bosch platinum plugs, Vitesse cf spark plug cover, Vitesse cf CAI, Samco hoses, Fiamm air horns. Drivetrain: custom ssk, Vitesse adj. clutch stop, Redline D4 ATF & 75W90. Chassis: 18x8.5 Hartge Classics on 225/40/ZR18 Direzza DZ101s, 17x8 Hartge 7 spokes on 235/40/17 Direzza Z1 *specs and 17x9 Enkei MT1-R on 235/40/17 Direzza Z1 *specs(track), Vitesse 10mm spacers with cf/billet hub extenders, Bilstein PSS9 coilovers, Hartge sway bars & strut brace, urethane offset LCABs, Vitesse rsb, billet/urethane RSMs, X-brace, ATE BBK, ATE slotted rr. rotors, Goodridge ss. lines, ATE Superblue. Exterior: Violettschwarz, Hartge lip spoiler, window spoiler, hatch spoiler & mirrors, Vitesse cf door pillars, Vitesse cf fog light blanks (track), ZKW ellipsoids, HIDs in headlights, highbeams and foglights, and much more... Performance BMW Magazine feature car March 2003 www.vitessetuning.com
H3_2.1-ti is offline   Reply With Quote
Old 09-28-2007, 03:49 AM   #5
larryn
Senior Member
 
Join Date: May 2007
Location: Seattle, WA
Posts: 402
iTrader: (0)
Default

Crud, I volunteered to set up and run an autocross at Mini Peabody. It's called the OktoberFAST event. If you can't get to Portsmouth on Sunday the 7th, there's always this event. I'm bringing the 332ti.

There will be mostly Minis there, but a few of the guys that are helping me set up and instruct are bringing their BMWs.
__________________
1997 332ti - Don't even ask.
2006 330i - ZPP/ZSP/ZCW/6sp/Nav/BT/H&R Sport
2011 E92 M3
larryn is offline   Reply With Quote
Old 09-28-2007, 04:14 AM   #6
StealthBimmer
Senior Member
 
StealthBimmer's Avatar
 
Join Date: Jun 2006
Location: Boston, MA
Posts: 1,152
iTrader: (0)
Default

I will be there again! See you there Phil and the baby. There is a post under NE forum. No larryn???
__________________
Two is better than one!
96 Schwarz ll 668 318ti auto
98 Schwarz ll 668 318ti sport ///M manual

My Ultimate Driving Machines


BMWCCA #369516
http://www.boston-bmwcca.org/
Best MA ti meet pics
Recommended tint place
StealthBimmer is offline   Reply With Quote
Old 09-28-2007, 02:23 PM   #7
H3_2.1-ti
Senior Member
 
H3_2.1-ti's Avatar
 
Join Date: Apr 2005
Location: Great White North!
Posts: 701
iTrader: (0)
Default

The baby and my wife will remain at home this year; 6 weeks is probably a little early for a road trip...
__________________

Engine: 2.1L Hartge conversion (bored to 86X91mm, ported & polished head, new valves, new crank, & upgraded ECU), Supersprint SS headers, Hartge exhaust, custom cat bypass (track), KV85 wires, Bosch platinum plugs, Vitesse cf spark plug cover, Vitesse cf CAI, Samco hoses, Fiamm air horns. Drivetrain: custom ssk, Vitesse adj. clutch stop, Redline D4 ATF & 75W90. Chassis: 18x8.5 Hartge Classics on 225/40/ZR18 Direzza DZ101s, 17x8 Hartge 7 spokes on 235/40/17 Direzza Z1 *specs and 17x9 Enkei MT1-R on 235/40/17 Direzza Z1 *specs(track), Vitesse 10mm spacers with cf/billet hub extenders, Bilstein PSS9 coilovers, Hartge sway bars & strut brace, urethane offset LCABs, Vitesse rsb, billet/urethane RSMs, X-brace, ATE BBK, ATE slotted rr. rotors, Goodridge ss. lines, ATE Superblue. Exterior: Violettschwarz, Hartge lip spoiler, window spoiler, hatch spoiler & mirrors, Vitesse cf door pillars, Vitesse cf fog light blanks (track), ZKW ellipsoids, HIDs in headlights, highbeams and foglights, and much more... Performance BMW Magazine feature car March 2003 www.vitessetuning.com
H3_2.1-ti is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New England Auto Show 2008 at BCEC StealthBimmer New England - US 2 11-30-2008 10:14 PM
The Most wonderful time of the year trickiekid Wheels and Tires 18 12-19-2007 08:19 PM


All times are GMT +1. The time now is 03:27 PM.


.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 84.73 k/99.69 k (15.01%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.