 Alarm lights flash
I was reading a few write ups on the alarm systems. they mentioned there are DIYS to make the lights flash when you arm and unlock he alarm system.
I have a 1996 318ti with the factory two button alarm system. In its current state there are no chirps or lights, just loud locks when locking or unlocking. If it is night time I can see my dome lights turn off.
I was wondering how difficult it is to wire up the hazard lights to flash when arming the system. I have a set of halos on the and would like to set those up too to flash as well.
If someone could share the link for the DIY that would be great. I've spent about an hour searching and can't find it.
Thanks! | 
Threaded Mode