318ti.org forum

Go Back   318ti.org forum > Technical, Maintenance and Modifications > Transmission
Reload this Page Is there any pressure plate adjustment to help a slipping clutch?
Register FAQ Donate Calendar Today's Posts Search

Notices

Transmission Automatic, manual and shift lever discussions.

.
» Recent Threads
The 318ti OBD-II engine...
10-19-2006 06:48 PM
Last post by Filiski120
04-24-2024 06:40 PM
210 Replies, 992,038 Views
Reply Share/Bookmark
 
Thread Tools Display Modes
Old 03-02-2009, 06:49 PM   #1
robcon27
Junior Member
 
Join Date: Jun 2008
Location: Oklahoma
Posts: 12
iTrader: (0)
Photo Gallery
Default Is there any pressure plate adjustment to help a slipping clutch?
I have a 96 ti and the clutch is starting slip, is there any way I can adjust the pressure plate or do something to help it?
robcon27 is offline   Reply With Quote
Old 03-02-2009, 08:30 PM   #2
Mallard
Senior Member
 
Mallard's Avatar
 
Join Date: Nov 2006
Location: Land of the Vikings
Posts: 2,700
Vehicles
iTrader: (0)
Photo Gallery
Default
if its slipping then try to see why first.

If the friction plate is worn, oiled because of a leak in the ring to the engine, the slave or master cyl isnt withdrawing completely ?

there isnt any adjustment as the plate is sprung, and the disengangment is done hydraulicly..
__________________


Vin Number decode and Retrofit Pdfs Available Free ! Just PM
Mallard is offline   Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Auto Trans serviced, now slipping!! ridgerunner Transmission 4 01-07-2011 07:24 AM
FS: Clutch Plate drkblu318ti US and North America 3 09-02-2007 03:16 AM
auto slipping dguzzardo22 Transmission 6 12-08-2006 01:59 AM
help please, can't stop the slipping jetblack95 HVAC 21 07-30-2006 05:53 PM
'99 M3 clutch, p-plate, dual-mass flywheel J!m US and North America 0 05-02-2006 12:31 AM


All times are GMT +1. The time now is 06:33 PM.

Donate - Contact Us - www.318ti.org - Archive - Top

.
Powered by site supporters
vBulletin Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2024, 318ti.org
© vBadvanced CMPS v3.2.2
[page compression: 62.65 k/72.45 k (13.53%)]

318ti.org does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information or products discussed.