* DIY * Replace the Valve Cover Gasket and Spark Plugs on the M42/44 Engine. Parts Needed: • M42/M44 Valve Cover Gasket: 11121721876
• Rubber Bolt Washers (15x): 11121721879
• Spark Plug Hole Gasket w/Bolt Hole: 11121721475
• Spark Plug Hole Gasket w/o Bolt Hole (3x): 11121721476
• Oil Supply Seal: 11121247948 (M44 only)
• Spark Plugs (4x): I used NGK “BKR6EK”
• High Temp RTV or any gasket sealer you desire.
Tools Needed: • 7mm Socket
• 10mm Socket
• 13mm Socket
• 16mm Socket
• 8mm Combo Wrench
• 10mm Combo Wrench
• Philips Screwdriver
• Flat Head Screw Driver
• BMW Tool Kit Spark Plug Socket (Look in your trunk)
• BMW Spark Plug Boot Puller. Attached to valve cover
• Air Compressor w/ Blow Gun (optional)
New Parts. Valve Cover Gasket + Spark Plug Seals
Rubber Bolt Gasket/Washer
New NGK Spark Plugs