I asked about weights and they don't have any parts in stock. Aparently these are built to order. He guesstimated that they'd weigh about 1/2 of the OEM parts. The only other lightweight hatch I've seen is the one from DTM FiberWerks and they're going for ~$1100 and are 11 lbs. There's is a "carbon look" piece where the majority of the part is made of fiberglass and then it gets a top layer of carbon for a nice finishing touch. In my experience with Mitsubishi Evo parts, these end up heavier than a plain fiberglass part. Here's the weights I measured when I pulled things off the car: hood - 38 lbs front bumper -45 lbs (bumper skin, crash beam, mounts, & upper grill piece) front fenders - 15 lbs (7.5 lbs each) rear hatch - 46 lbs (hatch, glass, & both hatch struts) rear bumper - 30 lbs (bumper skin, crash beam, & mounts) The weight on the entire kit I've been quoted 27.3 kg (60.6 lbs). If we believe the quoted weight looking simply at size and shape of the parts, I'd guesstimate the following: hood - 16 lbs hatch - 11 lbs front bumper - 7 lbs rear bumper -6 lbs front fenders - 8 lbs rear over fenders - 6 lbs wing - 7 The shop wasn't really able to offer me shipping qoutes based on different amounts of ordered parts (i.e. what if I add an extra hood & hatch to my order), but I think its a safe bet to estimate that shipping to me in Denver is going to run at least ~$750, and then there's shipping from me to wherever you guys are. Based on hoods & trunks I've shipped before, they'll have to go truck freight, and will likely cost $150-200 since I don't own a shop or ship enough parts to get shipping discounts. I'm not really looking to make any $$ on these parts, just thought if there were one or two people who wanted something, we could spread that overseas shipping costs out over a few more parts. If anyone's still interested, LMK asap as I'll likely be placing an order very soon. Thanks! Dave |