To add. My chassis is a 97 318i. I am using the following parts from my OBD2 318i. Full harness Two DMEs Top part of intake manifold Fuel rails, injectors, all sensors on manifold Knock sensors, coolant sensor, oil temp. sensor EVAP Coil pack and wires. all plugs, sensors, harness are from OBD2 from my original 318i motor, ect. My motor is from a 95 318Ti -The only thing from the 318Ti that came with motor was the Alternator. ------------------------------------------------------------------------- Conclusion: The car has no spark, has fuel smell, Turns over but no spark or start. Im using the crank and cam sensor from OBD1 318iC. I think thats why its not starting, no signal to the computer to start as if the cam gears and crank are ready to roll. |