I was ripping the floor out of my ti, so I did this.
Ran out of spool in the mig so I didn't get to finish the last (aesthetic) weld. However, I just went for a test run.
Awesome.
Welded a washer in place as a spacer.
This is the back side of the bracket I made last year. I didn't take a picture after the welds, but I finished welding the along the top there. (crappy welds on the left were because I didn't take the differential/axles down) In this picture you can also see the crack along the top (see the seem where the oil stops and the dry spot begins)
Passenger side of the top brace.
Top of the plate that drops through the floor and to the differential ear tab.
Finished.