Update!!
Done.
The camber plates I found didn't work but the offset mhats worked just like I wanted.
So I still need a alignment but here are a few pics of the outcome.
Once I get the alignment I can post up actual camber/caster/toe numbers.
**sorry for the bad quality pics**
M Hat rotated for max positive camber, and some less caster:
Right Side:
Left Side:
Middle pic:
e46LCA installed:
Side by side of e46 and non M e36 LCA - really bad quality, sorry!
You will also notice that I have the m3 front sway bar so the end links don't bolt to the LCA but to the Shock tower.
Well there it is, I found also I need new tie rods up front.
But I'm happy that it seems workable at the moment!
Feedback appreciated.