Your wheels looks like the are pushed really far forward into the wheel well. Are you running M3 offset control arms with the offset bushings? That will cause the geometry to get screwy and make the wheel sit really far forward in the wheel well.
BWM never speced a car with both. You either do the standard control arms with the offset bushing, or go the other way with the later m3 control arms but a standard bushing.
The build quality does not look that bad on the BC racing coilovers. However, the difference in price between these kits and the other kits you mentioned is in the dampening and the changes that adjustments make. There is plenty of dyno plots showing the changes a Koni DA makes in comparison with the lower end coilovers. Ultimately though, it is what makes you happy for the money spent.. Enjoy.. |