First post here.
After doing my s52 swap on my 318ti i decided to take it up angeles crest and realized how baddly i need more tire.
a little bit of info about the ti
Coilover front drop spring rear
factory wheels and i think im running a 215 off hand
Ill be purchasing a wide body kit from over seas that will extend wheel coverage 2.7" each corner. After talking with the manufacture they informed me that they have no idea what wheel dimensions to run.... lol ..... fml ....
so ideally i would like to run a 255 on 17s all the way around but im concerend about backspacing/offset especially when running a wider wheel/tire combo.
my front tire even with the spacer is awfully close to the coilover.
my factory wheel is a 16x7 with 46mm offset
if i keep the same width and just run the correct offset i would need
a -24mm offset wheel.
if my tires are a 215 (8.5") and i want to run a 255 (10")
would i need to run -48mm offset wheels to get the correct fitment?
Im just trying to make sure my math is correct
