Quote:
Originally Posted by covert24  The regulator isn't outputting anything and the pots are indeed correct I got angry and threw it on the ground and broke the board in half.... So needless to say I ordered the the pre made board of of batchpcb and will be getting all new components... How long should I make the wires btw? Any certain length I should shoot for? |
I install my simulator in the cabin since they are not weather resistant.
Wires need to be long enogh to reach both O2 sensor signal wires and power wires need to be long enough to reach the air pump plug so it is powered by the DME calling for air pump at the plug. I do about 7 feet of wire on each connection and cut off what I don't need.
You can also tap directly into the DME wiring harness for a shorter wire solution however it is not fun tearing apart the wiring harness and you need the DME diagram pinout for your cars year & model to ensure you are tapping the correct wires.
John Smith