Quote:
Originally Posted by 1996 328ti Thanks. The only thing I would add is to test fit both sides first before fastening. |
Test-fitting is for wimps! If I had test-fitted the parts, I would have discovered the passenger side had to go on first
BEFORE I fastened down the driver side and where would the fun in
THAT be? I'll always remember the passenger side goes on first because I have the remove and refit the drivers side!
OK, seriously, once I had the two pieces installed, I adjusted the pieces because there was a big gap in the center and one piece was higher than the other. There was enough play in the fasteners/clips that the final alignment could be done while the pieces are still attached.
Greg