318ti.org forum - View Single Post - Vaccum Hose

yeehawbob · 11-09-2004, 08:27 PM

Danny,

I have had my "Camshaft position sensor" replaced just last week and there was a vaccum hose that my Mechanic repair.
The vaccum hose will, cause the CEL to come ON. Now which one is it? That you will have to explore. Just see if any one of them has cracks on them, specially close to the place they plug into the emgine. You may want to take the car back to the same guy and ask him which hose did he fix.

It will be good if you replace your o2 sensors too which is a very easy job to do.

Good Luck!

11-09-2004, 08:27 PM	#2
yeehawbob Member Join Date: Aug 2004 Location: Santa Clara Posts: 97 iTrader: (0) Photo Gallery	Danny, I have had my "Camshaft position sensor" replaced just last week and there was a vaccum hose that my Mechanic repair. The vaccum hose will, cause the CEL to come ON. Now which one is it? That you will have to explore. Just see if any one of them has cracks on them, specially close to the place they plug into the emgine. You may want to take the car back to the same guy and ask him which hose did he fix. It will be good if you replace your o2 sensors too which is a very easy job to do. Good Luck! __________________ *SOLDThe Ultimate Dying* Machine!!! '97 318Ti, Active. 17" wheels *SOLD* 137k Hard driven miles.