Quote:
Originally Posted by 3.2TI  That's a beefy CA... These are compatible? |
Nope.
They will give you excessive neg camber without any correction, the ends that go into the LCA bushing is hexagonal, so they need to be grind ed down to fit regular e36 LCA's or tree house racing has, or had at least, hexagonal bushings that will fit into the regular e36 lollipops, then it will fit, but I'm not sure if they push far enough up on the CA. The ones I put on where ground down to fit.
Pros:
They are aluminum and are 2lb
ish lighter (estimated with bathroom scale) regular non M e36 LCA at around 9lbs and the E46 ones at 7lbs. (The bathroom scale isnt the most accurate thing, so estimated!)
Give more width, and lock (?)
and thats about it.
Links for more info:
http://www.driftworks.com/forum/tech...ry-photos.html