View Single Post
Old 11-06-2012, 11:39 PM   #156
cooljess76
NOBODY F's with the Jesus
 
cooljess76's Avatar
 
Join Date: Oct 2006
Location: Ventura California
Posts: 7,824
iTrader: (6)
Default

Quote:
Originally Posted by Eric View Post
So it looks like the glass is popping out of the front runner toward the outside.

First, I would recommend making sure that everything else in the system is working properly. If I can decipher your unpunctuated post correctly, it sounds as though one of the arms that raises the glass is damaged - if so, that has to be fixed before you can do anything else.

Are the nylon sliders in the window channel, that the spherical joints on the ends of the arms snap into, in good condition?

If every other part of the window mechanism seems good, then, yes, you need to bend the rear edge of the front runner inward.

- Eric
You ALWAYS need to bend the vertical track back into position. Obviously it's twisted if it allowed the window to come off track in the first place. The problem is that so many people like yourself, are too lazy to read the actual tutorial. They think that simply straightening the regulator arms and regreasing the sliders is going to fix the problem. There's more to it than that.
cooljess76 is offline   Reply With Quote