Quote:
Originally Posted by DaveAZ  Since no one had a circuit diagram/schematic, I drew one up.
I gathered everything on Neil's shopping list, but I haven't assembled it yet.
If anyone does, take some pics and post them up. I'll do the same. |
Thanks for this! would you say the signal has to be set to 200mv for all cars or do you think it could vary?
Im doing this for a z4. also I don't see any tutorials for my car and have no idea how to locate those cables.
I used all data which contains same as
http://wds.spaghetticoder.org/ it explains how the circuit functions and the cables to look for. But the schematic only shows one cable going from the dme to the o2 sensors.
here is mine
