Quote:
Originally Posted by MINIz guy  Ok, so I'm midway through this whole DIY and decided to stop before my fingers get frostbite.
I just need to put my gasket and bush back on and reassemble.
Do you guys recommend putting some RTV silicone between the housing and gasket to help seal it? I still have the whole tube of red high temp RTV silicone from my valve cover job and I really don't want to go and do this again if it does start leaking again. |
I haven't done this yet but I generally always use a light spray of a gasket seal to simply hold the gasket in place.
Additional photos and comments
http://www.boards.ie/vbulletin/showt...6958297&page=2 beginning with post 26.