View Single Post
Old 10-09-2017, 03:15 AM   #9
anassa
Senior Member
 
anassa's Avatar
 
Join Date: Dec 2011
Location: SoCal
Posts: 702
Vehicles
iTrader: (1)
Default

Quote:
Originally Posted by andakn View Post
The lower perch on the strut of an M3 is smaller than the ti. If you put TI struts on an M3 mount the strut will hit the inside of the strut tower on turns. I've already done this. So i use all m3 parts and then cut the springs down to get the ride height i wanted
What do you mean about the strut, perch?

The lower perch for the spring is smaller on the m3, but the m3 strut mount I think will fit fine on non-M strut? I haven't tried, not sure

Preferable to not cut the spring!
__________________


***328ti Build thread. ***

Even more important:
SUPPORT 318ti.org! CLICK THE LINK ABOVE!
Hosting a forum like this is not free. 318ti.org is one of the best BMW forums on the web because it is member supported, not vendor supported. The cost to become a Supporter is a nominal $10.00... A YEAR! DO IT! NOW!
anassa is offline   Reply With Quote