View Single Post
Old 08-15-2006, 03:17 AM   #6
CirrusSR22
Senior Member
 
Join Date: Nov 2004
Location: Minneapolis
Posts: 1,587
iTrader: (3)
Default

#8. Remove the ignition pack, spark plug wires, plug wire channel w/ heat shield, and insert tray as one unit. The insert tray lightly clips into the top of the valve cover. Use a flathead screwdriver to unsnap it. The wires hang up in the passenger side rear corner, so it takes some wiggling to get the whole thing out.

--
All removed.
CirrusSR22 is offline   Reply With Quote