Ok so let me get things a little bit organized here, what you've replaced so far Engine Mounts Fuel Filter Spark Plugs? All Vacuum Hoses Fuel cap Coil Pack DISA Anything else has been replaced ? Engine shaking before you replaced all the above can directly be connected to the bad engine mounts you used to have before replacing with new one. Make sure that MAF connector is connected properly, disconnect and reconnect it same for the coil pack (disconnect and reconnect). Make sure to disconnect the -ve battery terminal just as a precautionary measure! Also check splice no. X6461, it is directly connected to both Intake air temperature sensor and the tank pressure sensor. first picture I attached shows the location of it. |