I know you mentioned you are not trying to spend on custom, just wondering what you are willing to pay for a 328 or m3 driveshaft because I have a few places that you can get it from. the only thing is that they are not cheap and you will have to be sure of part you need. I recommend you get the vin from the engine and type the last seven into realoem.com and look for the driveshaft part# that came with that car. Then you should do a reference on the part to see what other cars may have that part. This could help you find it easier with the right part number. If I am not mistaken all sedan and coupes are the same length but I could be wrong so check that as well. Remember that buying a used driveshaft requires a new Guilbo since most either don;t include it or is too old and worn to use. Expect to pay in the range of $200-400. __________________ |