Thanks for posting this.... definitely made completing this job a lot easier. Unfortunately, I had the same problem with the bolts shearing off in the cylinder head using a torque wrench set properly (goes down to 5ft/lbs and I tested it first). I didn't get close to spec before breaking the bolts. After 160k of heat cycles and probably multiple removals, these things were soft to say the least. So, to the point... if you need the longer ones, they are M6X42,5 part # 11121721877 or 11127568809. The resource I found had both listed. You'll need 13 of them at about $3 a pop from the dealer. |