View Single Post
Old 11-23-2016, 03:32 AM   #13
anassa
Senior Member
 
anassa's Avatar
 
Join Date: Dec 2011
Location: SoCal
Posts: 702
Vehicles
iTrader: (1)
Default

Quote:
Originally Posted by anassa View Post
So things are moving forward.

Picked up some parts:

- ACS Type 1 monoblocks 17x8.5 et13
- Z3 steering rack, finally!
- Ugly CF fenders that are "z3 style"
- Fiberglass front bumper support beam
- Clear front, side, rear lights
- M side trim (Thanks to Bwwaaaa!)

Next weekend I will be picking up a whole rear 6cyl rear end: Subframe, trailing arms, axles - no diff.

This is actually a continuation from a widing idea with e46 LCA's I tried back in 2013: http://318ti.org/forum/showthread.php?t=37032

The idea is that the e46 LCA's widen the front track, And the 6cyl z3 rear trailing arms do the same thing effectively widening the whole width of the wheels without running low ET wheels.

Also this way I can get the camber/toe weld in plates separately and have less downtime as the car is a daily.

As it has been the case for the last 4 years the car desperately needs more power, but considering I drive ~250 miles a week now with work/school I will enjoy the MPG as I fix the small things and work on suspension/widening the car.

The ACS wheels will wait for a while as they are ugly chrome and bubbly, and with the et13 + widening, I will need to figure out a suitable way to widen the fenders, if the ACS go on they will be going on with at not much of a stretch, probably 235 tires. Since I picked up the carbon fiber "z3" style fenders I might get those cut into with a simple set of flairs. Not too sure yet.


Sorry for the slow progress! But this is a long term project so expect this thread like my last build thread to continue for a while, aka couple years.
---------------------------------------------------------------------------------------

UPDATE: 11/22/2016

So instead of bumping my thread with a post that doesn't have any good content I am just editing this one to add the following:

The project is on indefinite hold. Working two part time jobs and full time school + regular life is smashing me now and I need to turn it around a bit. I had some good stuff to show, but I am going to wait, I have some more drawings/print out and real parts for continuing the concept and bringing some reality to it. At this point of time I can't spend any more distracted time thinking about the car as anything other then transportation.

For the concept to work it has to be a complete package and not half-baked or else it will just suck, so patience until I can put in the proper time is required. Sorry!

******Oh wow... turned out I clicked response instead of "edit" to my thread... this is embarrassing!
__________________


***328ti Build thread. ***

Even more important:
SUPPORT 318ti.org! CLICK THE LINK ABOVE!
Hosting a forum like this is not free. 318ti.org is one of the best BMW forums on the web because it is member supported, not vendor supported. The cost to become a Supporter is a nominal $10.00... A YEAR! DO IT! NOW!

Last edited by anassa; 11-23-2016 at 03:34 AM. Reason: woops.. . .!!!
anassa is offline   Reply With Quote