View Single Post
Old 01-31-2010, 09:15 PM   #5
pnosker
Senior Member
 
Join Date: Aug 2006
Location: Central NJ
Posts: 2,440
iTrader: (4)
Default

1. What type of transmission? (auto/manual, Getrag, ZF, etc.)
Manual Getrag

2. Drive shaft came from what year & model car?
1997 318ti

3. Diff. ratio
2.93LSD

4. Diff. case size
Medium

5. Diff. was taken from what year & model car?
E30 eta (year unknown)

6. What type of diff. cover?
E30

7. Diff. cover was taken from what year & model car?
Unknown E30

8. Output flanges were from what year & model car?
1997 318ti

9. Half-shafts were taken from what year & model car?
1997 318ti

10. What modifications did you have to do?
None

11. Have you had any issues with this combination?
No, besides getting brand new bolts (heated bolts break easily with lots of power!)

12. Misc. Notes:
Install both sides simultaneously while raising the diff in or else it will be a very very tricky fit.

Last edited by roadrash; 01-31-2010 at 09:44 PM.
pnosker is offline