I've just completed the install on my compact. Took a bit of time to get it all wired in. I ended up soldering the fuel level sensor wire into the wire that goes to the instrument cluster. (connector X271 pin 1 (brown/yellow) This is the black connector), other than that I pretty much followed the instructions from the installed guide posted in this thread. Does anyone know how to change the compact obc from kmh to mph? I'm guessing there is a specail combination of buttons to access the service menu. The normal menu is accessed by pressing S/R and clock at the same time. Using the indicator button you can move through the menu options. Then with the clock button make changes. To save changes press S/R to cancel changes press the indicator button. this gives access to :- # 01 time format (12/24h) # 02 Display Test # 03 Usage correction # 04 shows "LSP" und beeps( no idea what this means?) # 05 Temperature format |