Quote:
Originally Posted by championc  I found the X20 connector under the battery tray. However, plug in station No. 24 was already filled. From wiring diagrams, it would appear that it should be connected to Pin 25 on the blue 26 pin connector on the rear of the instrumental panel which is what was suggested in Diagram 13. |
My ETM shows X17 pin 25 as not used. X20 pin 24 is the 'ti' (fuel injection signal) from the DME.
I have a couple questions:
- Does your car have an automatic transmission?
- Is the OBC displaying plausible fuel consumption values?