I bet the supercharger is still in good condition. These DASC chargers are cast by Magnuson and use all Eaton parts. I ran my DASC with a 2.8" pulley which put the SC at 16psi @ 15,000 rpm (supercharger redline per Magnuson is 15K). Oh did mention I sprayed a bunch of methanol through the SC and it never hurt the coating Heck I even ran Nitromethane through that DASC, all that talk of meth/water spray damaging the sc coating was a bunch of BS, it was a different issue that caused the coating to flake. My DASC was retired around 173K miles (went turbo). I sold it to a employee at Metric Mechanic and it was disassembled and it needed nothing. These are tough superchargers and last as long as the air is clean going in them. Dirt and sand will destroy any SC.
Well off my soap box. Best of luck with the sale
John S |