Power steering pump So I am turning left out of a Wawa parking lot when I spot a yayhoo in a truck in the right lane. I am headed for the left lane when I look and the aforementioned yayhoo was now in the left lane headed straight for me and my cousin! I turn sharp left to avoid an accident and in doing so I hit a divider that graced me with four bent rims and a busted oil pan. In trying to replace the pan the Bentley manual says that I need to remove the power steering pump and disconnect the steering shaft at the universal. My problem is that it looks like my power steering bracket and alternator bracket are one unit. Is this true or are the two separate, and if so, does anyone have a picture or something indicating which bolts to remove? Bentley's diagram for this procedure is not very accurate. Any help is appreciated. Thanks |