If you lower it too much and keep the stock shocks, you'll probably end up with some camber. The front can be corrected with an aligment, but I believe to adjust the rear camber you'll need camber plates. __________________ Portuguese 318ti MODS: Staggered M Kontours; Mtec Side Trim with M3 badges; Mtec Steering wheel with Airbag; M3 Modified Shift Lever; M3 Leather Shift Knob, Leather Centre Arm Rest; Euro Clear turn signals; M3 Electric and Heated Side Mirrors; Cat replaced by straight pipe; Mtec Rear Bumper; E36 M3 Front Brakes with EBC Drilled and Slotted Rotors and EBC Red Stuff Pads; Vader Seats. More to come! My Picture Gallery: http://www.318ti.org/gallery/showgal...r=1407&cat=500 |