I have a 1998 318ti. I just figured wiring to the rear connector of the cluster is easier than finding that wire in the nest of wires. I did install a factory new C.C. harness. Almost not in the mood to tear it all apart and find that wire. I also wired up OBC, but that worked out fine. My Bentley manual does show the sensor wire coming from and or going to the harness of the gauge cluster.
I'll poke around this weekend, and get back with you.
Thanks
Eric
Quote:
Originally Posted by central09  yes i do no where that one is ! on the cc harness there should be a black with white stripe wire or it may be a different color as long as you no that its your speed signal. but what you need to find is another black/white wire which will be to the left of the brake pedal in the corner, in a huge bundle of wires.. it may scare you because you may find more than one but they all gointo one circuit or w.e. its called but just splice them together and you will be all set
and as far as wireing to the rear i only no that the older bmw do that you have a 318ti right?
let me no if it doesnt make sense haha |