Thread: Manual Windows
View Single Post
Old 03-05-2011, 01:48 AM   #39
budget76
Senior Member
 
budget76's Avatar
 
Join Date: Nov 2007
Location: Rocky Hill, CT
Posts: 1,065
iTrader: (1)
Default

Got it done, and I'm VERY happy with the results. Works perfectly, and I can open my window again Bolts right in too. only uses two different holes already in the door, and the hole is already marked in the door panel.
Bigger regulator is the power one.

By budget76 at 2011-03-04
Marked hole in door panel to drill out.

By budget76 at 2011-03-04
Completed install:

By budget76 at 2011-03-04

Now, weight results. My postal scale only went up to 2lbs, couldn't find the bigger one.
Manual regulator: around 2.5lbs, the scale could almost hold it but not quite.
Power Regulator: I'd guess around 3.25lbs, I'll post up a true number if I find the other scale
Power motor: 1.75lbs
Manual handle and pieces: less than 1/8 lb.

So you DO save a couple pounds, figure more if you chop out all the necessary wires out of the car.
__________________
1995 318TI base. 95 2.5L from 325IS. S50 cams+pistons, e36 M3 front brakes. H&R race springs F+R. Turner Motorsport front sway bars, M3 control arms. M Roadster rear sway bar. Racing Dynamics strut brace. e36 325i 5spd. 3.25lsd from e28 535is. M Roadster short shifter. Conforti chip.
budget76 is offline   Reply With Quote