Very happy as I had success with cooljess76's recommendation on the e30 halfshafts and output flanges. The wheels and tires now fit perfectly. I also installed the Comforti Shark injector and the e46 330i front brake setup. Now for some fun, spirited driving. Thanks to all who contributed.
Quote:
Originally Posted by cooljess76  Good call Dave, I didn't think about that. RCV7, if you're running the 2.8L Z3 medium case diff, the ti halfshafts will still be too long, you'll need to get 6cyl e30 halfshafts and output flanges, which will also require you to shim your ABS sensors(just a washer).
So to clarify, use your current 2.8L Z3 subframe(same as 318ti subframe), 318ti trailing arms, 2.8L Z3 medium case LSD, e30 325i or 325is halfshafts and output flanges, pick up two washers with 5/8" centers at your local hardware store and shim your ABS sensors. Problem solved! |