318ti.org forum - View Single Post

rcair3d · 06-28-2010, 03:28 AM

From what I have been told you want very little pressure, if there is a good flow the valves are not seating right or are worn. I was more or less just curious. I have had three of these motors and all had a surprising blow-by.

06-28-2010, 03:28 AM	#6
rcair3d Senior Member Join Date: Feb 2009 Location: rockford illinois Posts: 127 '96 BMW 318ti California Ed. iTrader: (3) Photo Gallery	From what I have been told you want very little pressure, if there is a good flow the valves are not seating right or are worn. I was more or less just curious. I have had three of these motors and all had a surprising blow-by.