318ti.org forum - View Single Post

DASC SA · 11-12-2013, 10:31 AM

I have ordered 2 BMW pulleys and im also going to get a slightly longer belt to make up for the difference.
I have a smaller supercharger pulley already fitted, so belt will probably be close to original DASC size.
Will test fit a few to see whats best.

Thanks for all the help.
Been worried my toy will stop working soon as I can hear the bearings of the idlers quite loudly when I spin them by hand at the moment.

11-12-2013, 10:31 AM	#10
DASC SA Junior Member Join Date: May 2007 Location: SA Posts: 13 iTrader: (0) Photo Gallery	I have ordered 2 BMW pulleys and im also going to get a slightly longer belt to make up for the difference. I have a smaller supercharger pulley already fitted, so belt will probably be close to original DASC size. Will test fit a few to see whats best. Thanks for all the help. Been worried my toy will stop working soon as I can hear the bearings of the idlers quite loudly when I spin them by hand at the moment.