New sensor arrived today and got it fitted. No misfiring although still lumpy on idle, may be down to the fan missing 3 fins and unbalancing it plus a mullered engine mount.
Decided to give the car a jet wash off too, annoyingly blasted a load of the paint off too. Someone had set the jet washer to a rather high temperature, gr!
Also while fitted the new sensor, I noticed that my front wheels had rubbed through the paint on the inner arches, which would explain why one of the arch liners got ripped out on the last drift event I done. So now getting lower profiles on the front as once the cars lowered this will become more of an issue. Shall also take the wing off and clean everything up and underseal it.
Until next time. |